Mazen Amad

Contractor - EPC (Hired to work on design and build of Lines 1 and 2 of the Riyadh metro networks. These two lines will form part of the six-line metro system that will run for a total length of 176 kilometers across the city and includes 85 stations).

Summary:

The project involved work on Lines 1 and 2 encompasses detailed structural, architectural, electrical, mechanical, BMS, SCADA and transit system design together with construction, procurement of all products and materials, integration, testing and commissioning works and all the necessary support for project delivery Line 1 stretch from north to south through the center of Riyadh, along the Olaya-Batha corridor, covering 38 km. The line will include 22 stations and 4 transfer stations where it will connect with other new metro lines. Much of Line 1 will be under ground. Line 2 runs east to west along King Abdullah Road.

· Initiate, review, approve and maintain, as applicable, design (drawings, specs, materials selection. materials inspections), quality control procedures, inspection testing procedures and plans.

· Supervise the first line inspection and test of constructed assets in accordance with approved Inspection and Test Plans.

· Manage, coordinate and supervise QC Engineers / Inspectors on the project.

· Plan and coordinate with the QC Engineering team on a daily basis to allow for advance planning of the necessary inspections and testing for project activities in their particular section.

· Monitor closely the ongoing work activities under their control and make sure that works are completed in accordance with the approved shop drawings and specification

· Undertake independent inspections and tests to sample the works and the materials being brought to site and BACS store to verify compliance with the obligations of the contract.

· Act as liaison between the Employer, Field Engineering team, Subcontractors QC team and the QC team for the establishing and coordination of inspection activities.

· Manage all quality control staff and activities validating work is completed in accordance with project specifications, to the required quality standards and within prescribed timeframes including the allocation and mobilization of resources and the monitoring of use.

· Attend meetings with Employer, Construction Team, Subcontractors as the Contractor representative on matters relating to quality control.

· Perform inspections and audits of completed records & works and to confirm that they are complete.

Report Non Conformances identified (NCRs and CRs) within their section of the works as per the

Consultant - CM (Hired to work on KAP3, engineering consultancy services of design review and construction supervision of some 3,400 buildings on 600 sites across Saudi Arabia for the implementation of His Highness the King of Saudi Arabia's Security Headquarters Development Project. Value; Works 2.4 billion EUR, services: 180 million EUR, Buildings: 3,400, Sites: 600 and Professionals: 800).

Summary:

The project covered a variety of 48 types of buildings such as police stations, passport buildings, civil defense, hospitals, schools, clinics, residential buildings, stadium, training centers, data centers, facades, etc.

· Initiate, review, approve and maintain, as applicable, design (drawings, specs, materials selection. materials inspections), quality control procedures, inspection testing procedures and plans.

· Create, update and maintain all project submittal platforms and all other project specific quality control documents and reports.

· Manage and delegate tasks to a team of site quality control engineers and inspectors.

· Manage and control quality system requirements for the project, develop and maintain requirements of inspection and testing quality control in order to achieve consistent product quality and standard of workmanship

· Support the review of Electro-mechanical shop drawings and material submittals for conformance with project specifications by assisting the technical department manager with reviewing submitted documents, and by leveraging the knowledge and experience of others in the project team when necessary.

· Provide technical support to Construction Team, identify and communicate product quality requirements / relevant standards to maintain consistency of product quality.

· Create and improve quality awareness within the organization; and identify areas for improvements. Assist in assembling and forwarding project closeout documents that include O&M manuals and as-built.

· Develop a quality & inspection program that meets the provisions of the Operations & Maintenance Activity at project closure phase.

· Advise on the stoppage of work if necessary to resolve matters that affect safety, quality and/or inhibit the logical progress of work.

· Monitor and help construction team in resolve of non- conformance reports.

· Work with Contractor in producing the relevant ITP's.

· Develop the final building system inspection, testing and commissioning plans, forms and documents.,

· Review suppliers and contractors third party testing facilities and conduct periodic inspections and surveillances to assure product quality.

· Perform audits on construction team inspections, documents and records to confirm completeness, correctness, authorized by relevant parties.

· Perform review of developed project plans to assure conformity to the organization quality plan.

· Evaluate and update quality system process and procedures.

· Prepare QA/QC reports and communicate with other project parties.

· Prepared estimated project budget of $8 million USD for the project Developed and oversaw QA/QC program implementation; analyzed and audited quality throughout project; reviewed drawings, materials, documentation and site to ensure international quality standards were met.

· Initiate, review, approve and maintain, as applicable, design (drawings, specs, materials selection. materials inspections), quality control procedures, inspection testing procedures and plans.

· Delivered project two months ahead of schedule despite problems with original design; collaborated with team on developing solutions that kept project on time and maintained required levels of quality.

· Led QA department staff of five; monitored work performance and guided in project completion.

· Orchestrated RFP process; directed team in identifying suppliers and sourcing materials.

· Discussed non-conformance reports with manger and implemented “fixes” according to QA/QC plan.

· Created and implemented testing, start-up, commissioning and training plans.

· Reviewed processes of quality control systems and refined accordingly to increase efficiency of operations and ensure project met milestones.

· Delivered QA/QC reports to senior management.

Contractor – EPC (Hired to work on Well Flow Monitoring SCADA Project for 48 potable water wells located at sites throughout the West Bank and transmission of the flow monitoring data to a Central Control Building including Radio Communication System, Well Sites Mechanical & Electrical Systems (MEP), site stations buildings, Site PLCs & RTUS, SCADA Data Centre Building).

· Prepared estimated project budget of $8 million USD for the project Developed and oversaw QA/QC program implementation; analyzed and audited quality throughout project; reviewed drawings, materials, documentation and site to ensure international quality standards were met.

· Initiate, review, approve and maintain, as applicable, design (drawings, specs, materials selection. materials inspections), quality control procedures, inspection testing procedures and plans.

· Delivered project two months ahead of schedule despite problems with original design; collaborated with team on developing solutions that kept project on time and maintained required levels of quality.

· Led QA department staff of five; monitored work performance and guided in project completion.

· Orchestrated RFP process; directed team in identifying suppliers and sourcing materials.

· Discussed non-conformance reports with manger and implemented “fixes” according to QA/QC plan.

· Created and implemented testing, start-up, commissioning and training plans.

· Reviewed processes of quality control systems and refined accordingly to increase efficiency of operations and ensure project met milestones.

· Delivered QA/QC reports to senior management.

Contractor - Hired to work on projects funded by USAID, Drilling and Pump Testing of Four (4) Water Supply Wells of Depths up to 1000m, Construction of Well #17 Pump Station Building, Facilities (MEP) and Conveyance Systems.

• Effectively led the QA/QC department, closely monitored work performance and guided during project completion
• Looked after instrumentation electrical processes for construction projects, monitored key performance indicators and implemented continuous amendments to the maintenance work
• Generated QA/QC reports and shared with the senior management
• Discussed the non-conformance reports with construction managers and implemented "fixes" according to QA/QC plan
• Devised & implemented QAQC program after analyzing and auditing quality throughout project, reviewed drawings, materials, documentation and site to meet the international quality standards
• Formulated the estimated project budget for Well #17 Pump Station and Conveyance System
• Liaised with the teams on developing solutions that kept project on
• Supervised the RFP process and directed team in identifying suppliers and sourcing materials
• Developed and implemented testing, start-up, commissioning and training plans
• Examined quality control systems and modified it to increase efficiency of operations and complete project within deadlines.

Consultant - CM (Evaluated the existing electromechanical (MEP) and structural conditions of the Palestinian Water Authority (PWA) existing well and pumping stations as program of rehabilitation of PWA Eastern Hebron Bulk Water Supply System and Facility Buildings funded by USAID).

Summary:

• Prepared design for: new facilities, new buildings, rehabilitation of existing water pipe lines, construction of New Buildings, upgrade the 33KV, 3.3KV and 400V electrical systems, low current electrical systems, booster and deep Well pumps, water surge protection system, power panels and MCC’s, buildings (MEP) Systems (Lighting, AC Systems, Earthing, Fire Alarm, Lightning Protection, etc.), instrumentation, control system, PLC, & SCADA Systems.
• Reviewed all contractor submissions, i.e. work method plans, materials, shop drawings, etc.
• Prepared and delivered status updates and QC reports to Construction Manager.
• Resolved issues associated with project and ensured project met designated milestones.
• Inspected materials, completed work, issued site instructions and memos.
• Led weekly construction and progress meetings with various stakeholders.
• Enforced site safety and HSE plan.
• Monitored project costs and approved contractor payments.

Owner Representative - Recruited to manage construction of large factory building and electromechanical Systems (MEP) for iron pipes manufacturing, PE coating and internal cement lining of steel pipes.·

• Prepared design for new facilities, the 33KV, 3.3KV and 400V electrical systems, low current electrical systems, production lines, , power panels and MCC’s, buildings MEP Systems ( Lighting, AC Systems, Earthing, Fire Alarm, Lightning Protection, etc.), instrumentation , control system, PLC & SCADA System
• Liaised between owners, authorities, factory equipment manufacturers, suppliers and utilities.
• Initiate, review, approve and maintain, as applicable, design (drawings, specs, materials selection. materials inspections), quality control procedures, inspection testing procedures and plans.
• 0rchestrated schedule of contractors to ensure project stayed on target quality and estimated timeline.
• Selected materials and equipment; identified sub-contractors and procured resources.

Contractor - (Hired for the Construction of Phase Three West Bank Water Resources Program, Eastern Hebron Bulk Water Supply Project funded by USAID by constructing 2 new well pumping stations buildings, 2 new booster pumping stations buildings, water pipe lines (200Km), 1 power substation building, 33KV power overhead line (30Km), 33KV underground power line (100) km and 1 reservoir).

• Initiate, review, approve and maintain, as applicable, design (drawings, specs, materials selection. materials inspections), quality control procedures, inspection testing procedures and plans.
• Orchestrated the selection of all products, equipment and sub-contractors.
• Collaborated with teammates on troubleshooting and resolving issues.
• Reviewed subcontractor work; led weekly status meetings and reporting on progress.
• Calibrated, tested and commissioned system and system components, including: civil, power, control, pumps, piping, valves, and operators to ensure functionality.
• Managed compliance with environmental, safety and health requirements.
• Trained customer employees on new systems.
• Oversaw contractor work to ensure work complied with specifications; resolved and clarified issues that arose.
• Authored and distributed memos and site instructions.
• ·Steered the instrumentation/electrical processes for construction projects, monitored key performance indicators.
• ·Administered various elements of the maintenance program, including PLC, Instrumentation/Control system, SCADA system, etc. and analyzed device calibrations as well as spare parts availability.
• Streamlined procedures, equipment tools and evaluated project overview for testing/commissioning of high, medium/low voltage power systems/networks, Overhead Lines, Underground Cables, Switchgear, Transformers, Distribution Stations, etc.
• Interfaced with operators, mechanics, vendors, contractors, management and other groups to meet project objectives.
• ·Constructively resolved conflicts among the project team thus fostering their cooperation/collaboration.

Cosultant - (Reviewed engineering design and bidding documents for Phase Three of West Bank Water Resources Program, Eastern Hebron Bulk Water Supply Project funded by USAID for Constructing 2 new well pumping stations buildings, 2 new booster pumping stations buildings, water pipe lines, 1 power substation building, 33KV power overhead line (30Km). 33KV underground power line (100) km and 1 reservoir: prepared amendments to align with bid documents),

• Oversaw contractor work to ensure work complied with specifications; resolved and clarified issues that arose.
• Authored and distributed memos and site instructions.
• Steered the instrumentation/electrical processes for construction projects, monitored key performance indicators.
• Administered various elements of the maintenance program, including PLC, Instrumentation/Control system, SCADA system, etc. and analyzed device calibrations as well as spare parts availability.
• Streamlined procedures, equipment tools and evaluated project overview for testing/commissioning of high, medium/low voltage power systems/networks, Overhead Lines, Underground Cables, Switchgear, Transformers, Distribution Stations, etc.
• Interfaced with operators, mechanics, vendors, contractors, management and other groups to meet project objectives.
• Constructively resolved conflicts among the project team thus fostering their cooperation/collaboration.

Contractor - (Hired for the Construction of Phase Three West Bank Water Resources Program, Eastern Hebron Bulk Water Supply Project funded by USAID by constructing 2 new well pumping stations buildings, 2 new booster pumping stations buildings, water pipe lines (200Km), 1 power substation building, 33KV power overhead line (30Km), 33KV underground power line (100) km and 1 reservoir).

• Engineering design and construction management – Electrical, Control, Instrumentation of RAFAH WWTB -GAZA (10'000 m3/day).
• ·Envisaged engineering designs for the construction of restructured Pump Stations, Water Systems, assisted in the establishment of site EH&S plan and monitored all aspects of EH&S at site thus promoting project maintenance/operations.
• ·Analyzed/executed project requirements and reviewed projects to monitor compliance with safety codes and company policies/procedures. Resolved any unexpected technical difficulties, identified bottlenecks and effected systems reengineering.
• Engineered construction/maintenance of structures and perpetuated maintenance/commissioning of computer networks, fire systems, security systems, etc.
• Ascertained apposite construction means/methods and optimal cost effective plans/schedules. Oversaw the selection and requisition of materials for use in construction, quality control and safety matters on the site.
• Supervised, executed and authorized critical pre-inception surveys of existing / proposed infrastructure, with associated modalities pertaining to project construction and maintenance.
• Assured clear channel of communication between various participating contractors and subcontractors to negotiate contracts, ensure strict adherence to quality standards, deliverables, schedules and budgets.

Contractor (Led and directed project QC and electrical activities of USAID funded project was designed to provide a reliable source of clean water across the West Bank and Gaza. It included Construction of four pump stations, drilling five deep wells (1000m depth each), installation of high-pressure transmission lines and connecting permanent power for five existing pump stations).

• Directed daily QC staff activities/needs, interfaced with project work teams and acted as facilitator / coach in areas of quality control techniques.
• Steered the instrumentation/electrical processes for construction projects, monitored key performance indicators and implemented continuous amendments to the maintenance work.
• Administered various elements of the maintenance program, including PLC, Instrumentation/Control system, SCADA system, etc. and analyzed device calibrations as well as spare parts availability.
• Streamlined procedures, equipment tools and evaluated project overview for testing/commissioning of high, medium/low voltage power systems/networks, Overhead Lines, Underground Cables, Switchgear, Transformers, Distribution Stations, etc.
• Oversaw the functioning of Instrumentation/Control Systems to verify the maintenance of water stations piping/pumping, Main Electrical Networks, Main Electrical Distribution Stations/Substations.
• Presented monthly data of project performance parameters, along with O&M manuals, to the senior management and Technical Team Training.

Engineering and Construction Management- The Duties and Responsibilities for Electrical/Instrumentation/Low Voltage Systems included working on the design, site supervision and construction management of :

• Urban Planning Projects: Al Awdah City Project, Khan Younis Water Supply and Distribution Master Plan.
• Water Projects: Ein As-Sultan Irrigation Rehabilitation Project, Ein As-Sultan Refuge Camp Water Distribution System, West Bank Municipal Services Project-Water Resources Program, Khan Younis Water Supply and Distribution Master Plan.
• Public Sector Buildings: Construction of School Facilities for Basic Education in the West Bank - Japan International Cooperation Agency (JICA), The Extension of School Facilities in the West Bank - UNDP, Awdah Housing Project.
• Private Sector Buildings: Jericho Resort Village, Palestine Securities Exchange, Palestine International Bank, Commercial Bank of Palestine, Ministry of Economy-Trade-and Industry.

Contractor - The Duties and Responsibilities for Electrical/Instrumentation/Low Voltage Systems for various projects (included:
• Prepare cost estimates, shop drawings, as built drawings and Quantities take off.
• Lead the construction activities.
• Prepare the contract payment requests and claims.
• Coordination with Utilities.
• Testing and Commissioning.
• Project Hand Over.

Consultant- The Duties and Responsibilities for Electrical/Instrumentation/Low Voltage Systems included:

• Engineering Design,
• Construction Management,
• Projects Supervision and Site Support.

Projects executed;

• Urban Planning Projects: Al Zarqa Industrial Zone, Al Aqaba Industrial Zone, Al Zarqa Free Zone, Al Aqaba l Free Zone.
• Public Sector Buildings: Public Schools, Ma’an Stadium,
• Private Sector Buildings: Hospitals, Schools, Mosques, Ministries.

Consultant for Building Projects - The Duties and Responsibilities for Electrical/Instrumentation/Low Voltage Systems included:
• Engineering Design,
• Coordination with Utilities and obtaining licenses.
• Construction Management,
• Projects Supervision and Site Support.